+38(050) 394-07-63
ODO "DIZELMASH - KGU" produces diesel and gas engines of the type CHN25/34 - four-stroke, six- and eight-cylinder, with a vertical single-row arrangement of cylinders, with gas turbine supercharging and cooling of the charge air. The design of the engines, based on moderate crankshaft rotations (500–600 rpm), ensures high reliability in operation.
The engines are mounted on a sub-engine frame, on which water and oil coolers, an oil filter, and a pump for pumping oil are mounted. The engines are supplied with auxiliary equipment that is installed separately in the engine room (water expansion tank, oil tank with centrifugal filter, starting cylinders, a compressor for pumping cylinders, a spark arrester muffler).
The engines are automated according to the 1st stage of GOST 14228-80 with the following functions:
-
automatic speed control;
-
automatic temperature control in cooling and lubrication systems;
-
automatic alarm and protection for oil and water pressure, oil and water temperature;
-
local and remote control of pre-start lubrication, start, stop and speed;
-
engine overload warning alarm.
It is possible to supply units according to the Customer's technical specifications.

Gas engine 6GCHN25/34 for compressor drive

Dredger
with diesel engines 8CHN25/34
Our engine-generators have proven themselves over the years in operation in various natural and climatic conditions in more than 40 countries around the world.
ENGINES
FIELD OF APPLICATION
Diesel engines are used on river fleet transshipment vessels and on dredgers as drives for soil pumps, as well as as main marine diesel engines with a reduction gear and a pneumatic remote automated control system on tilting tugs and transport and crane vessels of a limited navigation area for operation with an adjustable pitch propeller.
Gas engines are used as compressor drives for compressing and pumping natural and associated petroleum gas.
River fleet transshipment vessels
Main marine diesel engines with reduction gear and automated control
Dredgers as drives for soil pumps.
Tipping tugs and transport and crane vessels of limited navigation area
Main marine diesel engines with reduction gear and automated control
TECHNICAL SPECIFICATIONS




Our gas engine-generators DvG1A-500, DvG1A-500-1, DvG1A-630, DvG1A-630-1 and cogeneration plants based on them with an electric capacity of 500 and 630 kW correspond to code 27.11.32-35.01 "Combined cycle gas piston machines with a capacity of 7.5 kV∙A with a fuel heat utilization factor of 83% and above" are included in the Industry Classifier of Energy-Saving Products, approved by the order of the National Energy Regulatory Commission of Ukraine dated 10.12.2010 No. 159 (since 2013 - by the order of the National Energy Regulatory Commission of Ukraine dated 21.06.2013 No. 79)